1. Open the door: turn the handle on the door lock. When the cam reaches a large stroke, first open the right door.

2. When loading and unloading goods, the door hook and hook seat on the side of the carriage shall be fixed firmly to prevent the door from rotating freely and affecting the work.

3. The position of the interior light switch is in the rear left corner under the exterior floor. After loading and unloading, the lighting must be turned off.

4. The emergency alarm switch in the engine room is set at the right rear. If someone is locked in the car, press the alarm switch to alarm.

5. Handle with care, no rough operation. The goods should be placed smoothly to prevent damage to the evaporator or refrigeration unit of the truck.

6. When loading, there should be a certain gap between the goods and the car wall to ensure the circulation of cold air. The height of the goods should not exceed the limit line.

7. After loading and unloading, the door must be locked, and the locking cam mechanism must be in place and clamped. Close the door on the left first.

8. The body is connected with the frame through screws and pressing plates. Before each trip, check whether the pressing plate screw is loose to prevent accidents caused by car body displacement.

9. The compressor of split refrigeration unit is driven by automobile engine. Check its working condition (such as loosening connecting screw, belt tension, etc.) Ensure the normal operation of the unit before each trip.

Shandong Tuolu automobile refitting Co., Ltd. will serve you wholeheartedly!